{"title":"New Arrivals","description":"\u003cp\u003eIt’s been a busy month in the shop. Here’s everything new since September, no tricks, all treats.\u003c\/p\u003e","products":[{"product_id":"11-gallon-passenger-side-undercarriage-water-tank","title":"11-Gallon Mercedes Sprinter Undercarriage Fresh\/Grey Water Tank (SP-UC-11)","description":"\u003ch2 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\n\u003cstrong\u003eAbout the Product\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e11-Gallon Sprinter Undercarriage tank claims the unused space under your slider door without drilling a new hole in your floor. Mounts between the Sprinter’s frame and the passenger-side slider door step cutout, using otherwise wasted undercarriage space. Use it as a fresh water tank or a grey water tank. \u003cmeta charset=\"utf-8\"\u003eThe tank body is sloped (2% grade), which makes it grey water compatible.\u003cstrong\u003e \u003c\/strong\u003eTEi lists it as both a potable water tank and a waste holding tank. It works well as a dedicated grey tank paired with a larger fresh water setup, or on its own for fresh water.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e⚠️ \u003cstrong\u003eGas engine Sprinters\u003c\/strong\u003e: The exhaust runs closer to the frame on gas models. A heat shield (not included) should be installed between the tank and exhaust before use.\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNominal dimensions: 38\" L x 12.5\" W x 9.875\" H\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eActual dimensions may vary up to 1.5% each.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e: 11 gallons\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eDry Weight\u003c\/strong\u003e: 12 lbs\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eFilled Weight\u003c\/strong\u003e: 104 lbs\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eRecommended Sensor\u003c\/strong\u003e: KUS \u003ca href=\"\/products\/preorder-kus-s5u-8-fuel-amp-water-level-sensor-1-5-npt-8-probe\"\u003eS5U-8\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eRecommended Heating Pad\u003c\/strong\u003e: Facon \u003ca href=\"\/products\/facon-cw-t1218-tank-heater-pad-12-x-18-12v-dc-automatic-thermostat\"\u003eCW-T1218\u003c\/a\u003e (x2)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNot designed for pressurized systems, must be vented\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBPA-free, food-grade polyethylene\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eTEi listed and RVIA approved\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eTEi listed to IAPMO TS 4 for fresh water\u003c\/li\u003e\n\u003cli\u003eTEi listed to IAPMO TS 2 and CSA B45.6 for grey water (waste holding)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"display: flex; align-items: center; gap: 24px; margin: 12px 0 20px;\"\u003e\u003cimg alt=\"cULus Certified\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/2_d9e59a56-9f1b-4edc-9aba-391ce9ac9531.png?v=1785260366\" style=\"height: 100px; width: auto;\"\u003e\u003cimg alt=\"RVIA Certified\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/1_351d9eea-954f-4ba3-964c-cb86dbb4cb7c.png?v=1785260365\" style=\"height: 100px; width: auto;\"\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eWater Tank\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(2) different stainless steel laser-cut mounting straps (for the slope)\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eStainless 3\/8\" hardware and 3\/8\" rivnuts\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNote: rivnut tool required, not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003ePorts \u0026amp; Plumbing\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(1) 1.5\" NPT port on the rear-facing end\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(2) 1\/2\" NPT ports on the rear-facing end\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(1) 1.5\" NPT port on top\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Time\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eShips in 1-2 business days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eNote: Despite great care taken during manufacturing and fulfillment, plastic tanks can become dirty and\/or scuffed in transit. This does not constitute a damaged tank. Plastic tanks can also become slightly warped, especially on the flat surfaces. This is normal and does not render the tank defective. Maintaining a completely straight\/flat surface on a rotationally molded part is not always possible, but we make every effort to keep surfaces within a 1.5 degree tolerance.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMercedes Sprinter 1500\/2500\/3500 (2007-present), wheelbases 144\", 170\", and 170\" EXT\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003ePassenger side, under slider door step area\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMay fit other makes and models, confirm dimensions before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eRunning Board Compatibility\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003eWorks with these running boards:\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003ca href=\"https:\/\/realtruck.com\/b\/amp-research\/\" target=\"_blank\" rel=\"noopener\"\u003eAMP Research PowerStep\u003c\/a\u003e Electric Running Boards for 2019-2021 Mercedes Sprinter (part #76264-01A)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eFactory Mercedes running boards\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/rovervans.com\/pages\/rovergear\" target=\"_blank\" rel=\"noopener\"\u003eRover Vans\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/owlvans.com\/collections\/side-steps-ladders\" target=\"_blank\" rel=\"noopener\"\u003eOwl\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/unakagearco.com\/\" target=\"_blank\" rel=\"noopener\"\u003eUnaka\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e⚠️ \u003cstrong\u003eFlatline Van Co\u003c\/strong\u003e running boards will not work as installed. They use a third, middle bracket that blocks any side-mounted water tank. To use Flatline boards, remove the middle bracket during the install.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Sprinter_Tanks_Only_Compatibility.png?v=1765563682\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eInstall guides\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/tei-test.com\/docs\/ListingSheets\/23I01.pdf\"\u003eTEI Listing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51172955488420,"sku":"NWS0286","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/NWC_Tanks_Product_Images_1.png?v=1792175275"},{"product_id":"fold-shower","title":"FOLD Shower","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAbout the Product\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GoCode Folding Shower (FOLD) is a complete van shower system that folds flat against the wall when not in use, reclaiming your living space the moment you're done. Fold down the pan, connect the shower curtain, and you're showering in under a minute. U.S. Patent No. 12082755.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003e*\u003cmeta charset=\"utf-8\"\u003eThe GoCode FOLD Shower is the new version of the Tetravan Folding Shower. Tetravan has been part of GoCode since 2025, and the FOLD Shower is the shower we now build and ship. It’s 24 lbs lighter and built to fit more cabinets, with a tighter-sealing curtain and a sturdier handle.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAluminum body folds flat against the wall or inside a cabinet when stowed — pan deploys in under a minute\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eUpper frame receives the folding pan and includes mounting holes for attaching to a cabinet or wall unit\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eShower curtain with intentional magnetic connection points for a tighter, more stable connection to the pan\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eCurtain has 3-zippered entry points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eIncludes pre-installed\u003ca href=\"https:\/\/gocodeoverland.com\/products\/stainless-steel-rv-and-marine-shower-port-system\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eShower Port System\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e with quick-connect hose, mixer valve, and shower head mount\u003c\/span\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eUpgraded stainless steel shower head with adjustable flow control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eScandvik 1.5\" straight drain fitting for easy water management\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eMesh zipper pouch and snap fittings included\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eMatte black finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eDimensions\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWeight: ~30 lbs (with metal plumbing components installed)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMetal body (W x H x D): 23-3\/8\" x 32\" x 3-3\/8\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePan Depth (deployed): 25\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDepth behind unit: Allow approx. 3\" for plumbing clearance at 27\" from the floor\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat's Included\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFOLD body and pan, pre-assembled, in matte black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMesh zipper pouch with snap fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e6 ft braided nylon quick-connect hose, mixer valve, and shower head mount (pre-installed\u003c\/span\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/stainless-steel-rv-and-marine-shower-port-system\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eShower Port System\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScandvik 1.5\" straight drain fitting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eShower curtain with magnetic connection points and 3 entry points\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFits any van, trailer, boat, or RV with adequate wall space\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Sprinter, Transit, and ProMaster builds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRequires approx. 3\" clearance behind unit for plumbing\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eShipping \u0026amp; Lead Times\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eShips in 1-2 business days\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/articles\/8592197222-how-to-install-the-gocode-fold-shower-complete-guide?preview=true\"\u003e\u003cspan\u003eInstall Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNeed Help? \u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003eHave any questions?\u003c\/strong\u003e Contact us at \u003ca href=\"mailto:sales@gocodeoverland.com%20\"\u003esales@gocodeoverland.com\u003c\/a\u003e, we're happy to help.\u003c\/span\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51182676902052,"sku":"TVU0390","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/DSC01076.jpg?v=1790188146"},{"product_id":"promaster-full-interior-trim-kit","title":"ProMaster Full Interior Trim Kit","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe GoCode Promaster Full Interior Trim Kit is the complete solution — everything you need to finish the interior of your Dodge Ram Promaster in one package. Includes B-Pillar, Over-slider, C-Pillar, Rear D-Pillar trim pieces, and aluminum rails for a fully finished, professional-grade interior.\u003c\/p\u003e\n\u003cp\u003eBuying the trim and rails kit saves you time and money versus purchasing individual pieces. Perfect for professional builders and serious van lifers who want a clean, cohesive interior build.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eThe GoCode ProMaster Interior Trim Kit covers all major trim areas inside your Ram ProMaster in one complete package. Every piece is precision-engineered to fit your van, save you time, and give you a clean, factory-finished interior from front to back.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eWE HIGHLY RECOMMEND USING THE RAILS WITH THE TRIM AS IT MAKES ALL YOUR WALL PANELS SQUARES AND EASY TO INSTALL\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCovers all major interior trim areas in one kit - 9 pieces total\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e7 pieces made from 3\/16\" ABS haircell plastic - ready to paint or upholster\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMaster Rails are optional - select your configuration\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eRail Kits include 2 sets of 2 pieces, designed to run the length of the van (rail kit comes with the option of 159\", 159\" Ext, and 136\")\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eRail kit is \u003cstrong\u003enot\u003c\/strong\u003e available in upholstered - although it's straightforward to DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eInstall before wall panels for best results - post-panel install is possible with minor trimming\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/promaster-b-pillar-driver\"\u003eDriver-Side B-Pillar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/promaster-b-pillar-passenger\"\u003ePassenger-Side B-Pillar + Overslider\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/promaster-c-pillar-driver\"\u003eDriver-Side C-Pillar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/promaster-c-pillar-passenger\"\u003ePassenger-Side C-Pillar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/promaster-rear-trim-kit\"\u003eD-Pillar Kit: 2 vertical pieces and 1 overhead piece\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMaster Rail Kit 159\", 159\" Ext, or 136\" (optional): 2 sets of 2 pieces\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAll required mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e: 2014+ Ram ProMaster 136\", 159\", 159\" extended\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMaster Rail Kit has the option of 136\", 159\", or 159\" Ext wheelbase\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFinish \u0026amp; Material Options\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e 3\/16\" ABS haircell plastic \u0026amp; aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpholstered:\u003c\/strong\u003e Marathon Tweed fabric\n\u003cul\u003e\n\u003cli\u003eABS trim parts \u003cstrong\u003eONLY\u003c\/strong\u003e. Master rails are \u003cstrong\u003eNOT\u003c\/strong\u003e upholstered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor visible installs, we recommend you finish the Master Rail (paint or upholster) to tie your walls and ceiling together.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping \u0026amp; Lead Times\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Ships in 1-2 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpholstered:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShips in 2 weeks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/articles\/2064568718-ram-promaster\"\u003eInstall Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FCcovlOzviw?si=kbkYpT2A2EMJODAP\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed Help?\u003c\/strong\u003e Not sure about your van's configuration or want to order individual pieces? Give us a call or email us at \u003ca href=\"mailto:sales@gocodeoverland.com%20\"\u003esales@gocodeoverland.com\u003c\/a\u003e — our team is happy to help.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePicture Credits: \u003ca href=\"https:\/\/automotiveupfitters.com\"\u003eAutomotive Upfitters\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"GoCode Overland","offers":[{"title":"Standard \/ With Rail (159)","offer_id":51304803369124,"sku":"GCP0391","price":1550.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ With Rail (159 Ext)","offer_id":54296882020516,"sku":"GCP0456","price":1750.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ With Rail (136)","offer_id":54296882053284,"sku":"GCP0457","price":1550.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ No Rail","offer_id":51302028542116,"sku":"GCP0308","price":1140.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Grey Heather \/ With Rail (159)","offer_id":51304803434660,"sku":"GCP0391-2","price":2350.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Grey Heather \/ With Rail (159 Ext)","offer_id":54296882086052,"sku":"GCP0456-2","price":2550.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Grey Heather \/ With Rail (136)","offer_id":54296882118820,"sku":"GCP0457-2","price":2350.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Grey Heather \/ No Rail","offer_id":51302019301540,"sku":"GCP0308-2","price":1950.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Black \/ With Rail (159)","offer_id":51304803467428,"sku":"GCP0391-3","price":2350.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Black \/ With Rail (159 Ext)","offer_id":54296882151588,"sku":"GCP0456-3","price":2550.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Black \/ With Rail (136)","offer_id":54296882184356,"sku":"GCP0457-3","price":2350.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Black \/ No Rail","offer_id":51302019334308,"sku":"GCP0308-3","price":1950.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Toast \/ With Rail (159)","offer_id":51304803500196,"sku":"GCP0391-4","price":2350.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Toast \/ With Rail (159 Ext)","offer_id":54296882217124,"sku":"GCP0456-4","price":2550.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Toast \/ With Rail (136)","offer_id":54296882249892,"sku":"GCP0457-4","price":2350.0,"currency_code":"USD","in_stock":true},{"title":"Upholstered Toast \/ No Rail","offer_id":51302019367076,"sku":"GCP0308-4","price":1950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Full_Trim_Kit.png?v=1790797747"},{"product_id":"gomaster-rail-driver-promaster","title":"ProMaster Master Rail Driver Side","description":"\u003ch2 dir=\"ltr\"\u003e\u003cstrong\u003eAbout the Product\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe GoCode ProMaster Master Rail (Driver Side) mounts flush to the van wall, giving you a solid, versatile anchor for building out your interior. Attach shelving, panels, gear storage, and more with ease.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt also squares up your wall panels, which makes them easier to install. We highly recommend running the rails with our trim.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis listing is for the driver side only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNeed both sides? \u003c\/strong\u003eCheck out the \u003ca href=\"https:\/\/gocodeoverland.com\/products\/gomaster-rail-kit-promaster\"\u003eFull Rail Kit\u003c\/a\u003e or the \u003ca href=\"https:\/\/gocodeoverland.com\/products\/promaster-full-interior-trim-kit\"\u003eProMaster Full Trim Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eSold individually (driver side only)\u003c\/li\u003e\n\u003cli\u003eMounts flush to the van wall\u003c\/li\u003e\n\u003cli\u003eDesigned to run the length of the van (rail kit fits 159 only)\u003c\/li\u003e\n\u003cli\u003e2 pieces connected by provided hardware and mounting plates\u003c\/li\u003e\n\u003cli\u003eStainless steel\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eNot available in matte or upholstered, but it's straightforward to DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstall before wall panels for best results. Post-panel install is possible with minor trimming\u003c\/li\u003e\n\u003cli\u003eMade in the USA by GoCode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDriver-Side ProMaster Rail (2 pieces)\u003c\/li\u003e\n\u003cli\u003eMounting plates and hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e: Ram ProMaster 159 only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFinish \u0026amp; Material Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eStandard only. For visible installs, we recommend finishing the rail (painted or upholstered) to tie your walls and ceiling together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Times\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eIn stock: 1-3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/articles\/2064568718-ram-promaster\"\u003eInstall Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/blogs\/news\"\u003eFrom the Blog\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNeed Help?\u003c\/strong\u003e Not sure about your van's configuration or want to order individual pieces? Give us a call or email us at \u003ca href=\"mailto:sales@gocodeoverland.com\"\u003esales@gocodeoverland.com\u003c\/a\u003e. Our team is happy to help.\u003c\/p\u003e","brand":"GoCode Overland","offers":[{"title":"159\"","offer_id":54297075876004,"sku":"GCP0464","price":300.0,"currency_code":"USD","in_stock":true},{"title":"136\"","offer_id":54297075908772,"sku":"GCP0468","price":300.0,"currency_code":"USD","in_stock":true},{"title":"159\" Ext","offer_id":54297075941540,"sku":"GCP0466","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/3_ef98fc8e-98ed-42cc-9ae1-a2e35c907b40.png?v=1790798303"},{"product_id":"gomaster-rail-passenger-promaster","title":"ProMaster Master Rail Passenger Side","description":"\u003ch2 dir=\"ltr\"\u003e\u003cstrong\u003eAbout the Product\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe GoCode ProMaster Master Rail (Passenger Side) mounts flush to the van wall, giving you a solid, versatile anchor for building out your interior. Attach shelving, panels, gear storage, and more with ease.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt also squares up your wall panels, which makes them easier to install. We highly recommend running the rails with our trim.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis listing is for the passenger side only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNeed both sides? \u003c\/strong\u003eCheck out the \u003ca href=\"https:\/\/gocodeoverland.com\/products\/gomaster-rail-kit-promaster\"\u003eFull Rail Kit\u003c\/a\u003e or the \u003ca href=\"https:\/\/gocodeoverland.com\/products\/promaster-full-interior-trim-kit\"\u003eProMaster Full Trim Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eSold individually (passenger side only)\u003c\/li\u003e\n\u003cli\u003eMounts flush to the van wall\u003c\/li\u003e\n\u003cli\u003eDesigned to run the length of the van (rail kit fits 159 only)\u003c\/li\u003e\n\u003cli\u003e2 pieces connected by provided hardware and mounting plates\u003c\/li\u003e\n\u003cli\u003eStainless steel\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eNot available in matte or upholstered, but it's straightforward to DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstall before wall panels for best results. Post-panel install is possible with minor trimming\u003c\/li\u003e\n\u003cli\u003eMade in the USA by GoCode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003ePassenger-Side ProMaster Rail (2 pieces)\u003c\/li\u003e\n\u003cli\u003eMounting plates and hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e: Ram ProMaster 159 only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFinish \u0026amp; Material Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eStandard only. For visible installs, we recommend finishing the rail (painted or upholstered) to tie your walls and ceiling together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Times\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eIn stock: 1-3 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/articles\/2064568718-ram-promaster\"\u003eInstall Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/blogs\/news\"\u003eFrom the Blog\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNeed Help?\u003c\/strong\u003e Not sure about your van's configuration or want to order individual pieces? Give us a call or email us at \u003ca href=\"mailto:sales@gocodeoverland.com\"\u003esales@gocodeoverland.com\u003c\/a\u003e. Our team is happy to help.\u003c\/p\u003e","brand":"GoCode Overland","offers":[{"title":"159\"","offer_id":54297075187876,"sku":"GCP0465","price":300.0,"currency_code":"USD","in_stock":true},{"title":"136\"","offer_id":54297075220644,"sku":"GCP0469","price":300.0,"currency_code":"USD","in_stock":true},{"title":"159\" Ext","offer_id":54297075253412,"sku":"GCP0467","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/5_77818b5f-04b0-417c-8056-8571e9e69e3c.png?v=1790798303"},{"product_id":"gomaster-rail-kit-promaster","title":"ProMaster Rail Kit","description":"\u003ch2 class=\"font-claude-response-body break-words whitespace-normal\"\u003eAbout the Product\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eThe Master Rail Kit includes both driver and passenger side rails for the Dodge Ram ProMaster 136\", 159\", or 159\" Ext — a wall and ceiling transition rail that runs from the C-Pillar to the D-Pillar on each side, tying your front and rear trim together for a fully finished interior.\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eFull driver and passenger side rail set included\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDriver side runs B-Pillar to D-Pillar and Passenger side runs C-Pillar to D-Pillar, bridging your front and rear trim for a cohesive finish\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDriver side rail is a two-piece bolted assembly\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eEngineered to terminate cleanly with GoCode \u003ca href=\"https:\/\/gocodeoverland.com\/collections\/promaster-trim-kits\/products\/promaster-front-trim-kit\"\u003eFront\u003c\/a\u003e and \u003ca href=\"https:\/\/gocodeoverland.com\/collections\/promaster-trim-kits\/products\/promaster-rear-trim-kit\"\u003eRear Trim\u003c\/a\u003e Kits (See the \u003ca href=\"https:\/\/gocodeoverland.com\/collections\/promaster-trim-kits\/products\/promaster-full-interior-trim-kit\"\u003ekit\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMade from .063\" aluminum\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003cspan\u003eRaw surface is easy to upholster yourself if desired\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDriver-Side Master Rail (2-piece assembly)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003ePassenger-Side Master Rail\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eRequired Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e: 2014+ Dodge Ram ProMaster (136\", 159\", or 159\" Ext)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eInstall Before Paneling\u003c\/strong\u003e: For best results, install before wall and ceiling panels. Post-panel installs are possible but may require trimming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eFinish \u0026amp; Material Options\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e.063\" aluminum\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor visible installs, we recommend finishing the Master Rail (matte or upholstered) to tie your walls and ceiling together.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Times\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIn Stock — Ships within 1-3 business days\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/articles\/2064568718-ram-promaster\"\u003eInstall Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/FCcovlOzviw?si=kbkYpT2A2EMJODAP\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eNeed Help?\u003c\/strong\u003e Not sure about your van's configuration or want to order individual pieces? \u003ca href=\"mailto:sales@gocodeoverland.com\"\u003eContact us\u003c\/a\u003e, we're happy to help.\u003c\/p\u003e","brand":"GoCode Overland","offers":[{"title":"159\"","offer_id":54297074106532,"sku":"GCP0367","price":600.0,"currency_code":"USD","in_stock":true},{"title":"136\"","offer_id":54297074139300,"sku":"GCP0459","price":600.0,"currency_code":"USD","in_stock":true},{"title":"159\" Ext","offer_id":54297074172068,"sku":"GCP0458","price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/2_0b30eff3-a7c6-45c7-badc-dd8b3fe58b17.png?v=1790797743"},{"product_id":"preorder-kus-s5u-6-fuel-amp-water-level-sensor-1-5-npt-6-probe","title":"KUS S5U-6 Water Level Sensor – 1.5\" NPT (6\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-6 is a 6\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 6\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u06\"\u003eKUS 154006\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-6 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe recommend these tanks for this sensor:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/toyota-tacoma-11-gallon-wheel-well-water-tank\"\u003e11-Gallon Toyota Tacoma Wheel Well Water Tank (TOY-11)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/grenadier-fresh-tank\"\u003eGrenadier Fresh Tank\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn stock, ships in 1-2 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457734213796,"sku":"KUU0426","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Untitleddesign_10.png?v=1788300864"},{"product_id":"preorder-kus-s5u-8-fuel-amp-water-level-sensor-1-5-npt-8-probe","title":"KUS S5U-8 Water Level Sensor – 1.5\" NPT (8\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-8 is a 8\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 8\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u8\"\u003eKUS 154008\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-8 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe recommend these tanks for this sensor:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/11-gallon-passenger-side-undercarriage-water-tank\"\u003e11-Gallon Mercedes Sprinter Undercarriage Water Tank (SP-UC-11)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/22-gallon-driver-side-undercarriage-water-tank\"\u003e22-Gallon Mercedes Sprinter Driver Side Undercarriage Water Tank (SP-UC-22)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/16-gallon-transit-undercarriage-water-tank\"\u003e16-Gallon Transit Undercarriage Water Tank (TR-UC-16)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/20-gallon-driver-side-transit-undercarriage-water-tank\"\u003e20-Gallon Driver Side Transit Undercarriage Water Tank (TR-UC-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn stock, ships in 1-2 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457735032996,"sku":"KUU0427","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Untitleddesign_6.png?v=1788300418"},{"product_id":"preorder-kus-s5u-9-fuel-amp-water-level-sensor-1-5-npt-9-probe","title":"KUS S5U-9 Water Level Sensor – 1.5\" NPT (9\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-9 is a 9\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 9\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u09\"\u003eKUS 154009\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-9 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe recommend these tanks for this sensor:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/28-gallon-sprinter-spare-tire-water-tank\"\u003e28-Gallon Spare Tire Water Tank (SP-ST-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-ford-transit-spare-tire-tank\"\u003e24-Gallon Ford Transit Spare Tire Tank (TR-ST-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn stock, ships in 1-2 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457735458980,"sku":"KUU0378","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Untitleddesign_9.png?v=1788300768"},{"product_id":"preorder-kus-s5u-15-fuel-amp-water-level-sensor-1-5-npt-15-probe","title":"KUS S5U-15 Water Level Sensor – 1.5\" NPT (15\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-15 is a 15\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 15\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u15\"\u003eKUS 154015\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-15 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the sensor we recommend on our 16\" tall wheel well water tanks:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/20-gallon-wheel-well-water-tank-left\"\u003e20-Gallon Wheel Well Water Tank - Left (SP-L-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/20-gallon-wheel-well-water-tank-right\"\u003e20-Gallon Wheel Well Water Tank - Right (SP-R-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/20-gallon-wheel-well-water-tank-centered-1\"\u003e20-Gallon Wheel Well Water Tank - Center (SP-C-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/25-gallon-dually-wheel-well-water-tank-copy\"\u003e22-Gallon Wheel Well Water Tank - Right (SP-R-22)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-wheel-well-water-tank-centered\"\u003e24-Gallon Wheel Well Water Tank - Center (SP-C-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/36-gallon-wheel-well-water-tank-centered\"\u003e36-Gallon Wheel Well Water Tank - Center (SP-C-36)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-ford-transit-wheel-well-water-tank-left\"\u003e24-Gallon Ford Transit Wheel Well Water Tank - Left (TR-L-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-ford-transit-wheel-well-water-tank-right\"\u003e24-Gallon Ford Transit Wheel Well Water Tank - Right (TR-R-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-ford-transit-wheel-well-water-tank-center\"\u003e25-Gallon Ford Transit Wheel Well Water Tank - Center (TR-C-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn stock, ships in 1-2 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457737392292,"sku":"KUU0382","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Untitleddesign_8.png?v=1788300664"},{"product_id":"preorder-kus-s5u-17-fuel-amp-water-level-sensor-1-5-npt-17-probe","title":"KUS S5U-17 Water Level Sensor – 1.5\" NPT (17\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-17 is a 17\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 17\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u17\"\u003eKUS 154017\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-17 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the sensor we recommend on our galley water tanks:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/10-gallon-galley-tank-fresh-grey\" title=\"10 gallon galley tank\"\u003e10-Gallon Galley Water Tank (Fresh\/Grey)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/nw-conversions-20-gallon-galley-water-tank-fresh-grey\" title=\"20 gallon galley water tank for vans\"\u003e20-Gallon Galley Water Tank (Fresh\/Grey)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn stock, ships in 1-2 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457737719972,"sku":"KUU0383","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Untitleddesign_7.png?v=1788300570"},{"product_id":"preorder-kus-s5u-19-fuel-amp-water-level-sensor-1-5-npt-19-probe","title":"KUS S5U-19 Water Level Sensor – 1.5\" NPT (19\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-19 is a 19\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 19\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/154019f\"\u003eKUS 154019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-19 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the sensor we recommend on our 20\" tall wheel well water tanks:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/19-gallon-slim-dually-wheel-well-water-tank\"\u003e19-Gallon Slim Dually Wheel Well Water Tank (SP-DU-19)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/25-gallon-sprinter-dually-wheel-well-water-tank\"\u003e25-Gallon Dually Wheel Well Water Tank (SP-DU-25)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/33-gallon-wheel-well-water-tank-left-sp-l-33\"\u003e33-Gallon Wheel Well Water Tank - Left (SP-L-33)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/33-gallon-wheel-well-water-tank-right\"\u003e33-Gallon Wheel Well Water Tank - Right (SP-R-33)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/nw-conversions-28-gallon-promaster-wheel-well-tank-left-pm-l-28\"\u003e28-Gallon Promaster Wheel Well Water Tank - Left (PM-L-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/nw-conversions-28-gallon-promaster-wheel-well-water-tank-right-pm-r-28\"\u003e28-Gallon Promaster Wheel Well Water Tank - Right (PM-R-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/28-gallon-dodge-promaster-wheel-well-water-tank-center\"\u003e28-Gallon Dodge Promaster Wheel Well Water Tank - Center (PM-C-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn stock, ships in 1-2 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457738178724,"sku":"KUU0384","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Untitleddesign_5.png?v=1788300314"},{"product_id":"facon-cw-st725-tank-heater-pad-7-1-4-x-25-12v-dc-automatic-thermostat","title":"Preorder Facon 7-1\/4\" x 25\" Tank Heater Pad – CW-ST725","description":"\u003ch2 dir=\"ltr\"\u003eAbout the Product\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe Facon CW-ST725 is a 7-1\/4\" x 25\" self-adhesive silicone heater pad for holding tanks up to 40 gallons. Facon builds it as a step\/tank pad, so the same pad works on entry steps, where it melts snow before it packs down and freezes. It bonds to the tank exterior and runs off a 12V circuit. The built-in thermostat reads the tank, not the outside air: it closes at 45°F and opens again at 68°F, so the pad only draws power when the tank itself is actually getting cold. Figure 5.0A to 5.8A while it is calling for heat.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e**CURRENTLY ON A 3 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eFeatures\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e12V DC, wired to the house battery circuit (no shore power needed)\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermostat reads tank temperature and cycles on at 45°F, off at 68°F, no external controller needed\u003c\/li\u003e\n\u003cli\u003eWorks on entry steps as well as tanks, per Facon\u003c\/li\u003e\n\u003cli\u003ePeel and stick adhesive mount (no brackets, clamps, or extra work)\u003c\/li\u003e\n\u003cli\u003e3.0mm foam pad with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eTwo-wire design, no plug, so it hardwires into your existing 12V circuit\u003c\/li\u003e\n\u003cli\u003eQAI Recognized Component, certified to CSA STD C22.2 No.130-03 and UL 499 (file E10681)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003ePad size: 7-1\/4\" x 25\"\u003c\/li\u003e\n\u003cli\u003ePad thickness: 3.0mm foam with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eFits: non-conductive fresh, grey, or black water holding tanks up to 40 gallons, or entry steps\u003c\/li\u003e\n\u003cli\u003eVoltage: 13.5V DC (12V system)\u003c\/li\u003e\n\u003cli\u003eWattage: 78W\u003c\/li\u003e\n\u003cli\u003eAmperage: 5.0A at 12V, 5.8A at 13.5V\u003c\/li\u003e\n\u003cli\u003eLead wire: 36\", two wires, no plug\u003c\/li\u003e\n\u003cli\u003ePolarity: Red is positive (+), white is negative (−)\u003c\/li\u003e\n\u003cli\u003eThermostat: Built in, reads tank temperature. On at 45°F (±5°), off at 68°F (±5°)\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature: 68°F (20°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eMaterials \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eMaterial: Silicone rubber heating element on a 3.0mm foam pad with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eTank material: Designed and tested for holding tanks and drain systems built from electrically non-conductive material. Not for metal tanks\u003c\/li\u003e\n\u003cli\u003eCircuit: Must be fused for the correct amperage and run through an on\/off switch\u003c\/li\u003e\n\u003cli\u003eCertifications: QAI Recognized Component, file E10681, certified to CSA STD C22.2 No.130-03 and UL 499\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eWhat's Included\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e(1) Facon CW-ST725 heater pad with built-in thermostat and 36\" lead wires\u003c\/li\u003e\n\u003cli\u003eNo switch or controller included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eOn a tank, mount the pad at the lowest point, closest to the drain. The surface needs to be smooth and clean, so wipe that area with isopropyl alcohol and let it dry, peel back the adhesive paper, then press the pad down firmly and smoothly. Do not stretch it. The pad has to sit flat against the tank or wrap around it, and nothing can sit on top of it, batteries especially, because heavy pressure damages the heating element. On a step, clean the surface the same way and press the pad into place. Facon requires a minimum installation temperature of 68°F, so install before cold weather hits, not during a freeze.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWire to a 12V circuit fused for the correct amperage and run through an on\/off switch. Red is positive, white is negative. If your build does not already have a switched circuit for the water system, you will need to add one. Secure the leads so they do not hang below the bottom of the tank. If you are running more than one pad, wire them in parallel and size the circuit for the combined draw.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSwitch the circuit on as outside temperatures approach 45°F and the thermostat takes it from there. Switch it off once temperatures stay above freezing, the tank has been drained, or the rig is parked for the season. Per Facon, the pad should not feel hot to the touch while it is working.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThese GoCode tanks take a single CW-ST725 each.\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/toyota-tacoma-11-gallon-wheel-well-water-tank\"\u003e11-Gallon Toyota Tacoma Wheel Well Water Tank (TOY-11)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/24-gallon-ford-transit-spare-tire-tank\"\u003e24-Gallon Ford Transit Spare Tire Tank (TR-ST-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003e*If your tank is not on this list, it takes a different pad. Most 16 to 28 gallon Sprinter and Transit tanks use a single 120V CW-T825. The larger Sprinter and Transit wheel well tanks and all Promaster tanks use two CW-T1218 pads each.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePreorder. 3 week lead time. Orders placed now ship as soon as stock arrives.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eResources\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Facon-Heater-Pad-Owners-Manual.pdf?v=1788286728\"\u003eFacon Heater Pad Owner's Manual\u003c\/a\u003e (CW-ST725 specs and wiring on page 5)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457883996324,"sku":"WPU0422","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/CW-ST725.png?v=1788290143"},{"product_id":"facon-cw-t1218-tank-heater-pad-12-x-18-12v-dc-automatic-thermostat","title":"Preorder Facon 12\" x 18\" Tank Heater Pad – CW-T1218","description":"\u003ch2 dir=\"ltr\"\u003eAbout the Product\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe Facon CW-T1218 is a 12\" x 18\" self-adhesive silicone heater pad for holding tanks up to 40 gallons. It bonds to the tank exterior and runs off a 12V circuit. The built-in thermostat reads the tank, not the outside air: it closes at 45°F and opens again at 68°F, so there is nothing to babysit. Worth planning for: most GoCode tanks that use this pad take two of them, so budget close to 10A on that circuit while it is calling for heat.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e**CURRENTLY ON A 3 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eFeatures\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e12V DC, wired to the house battery circuit (no shore power needed)\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermostat reads tank temperature and cycles on at 45°F, off at 68°F, no external controller needed\u003c\/li\u003e\n\u003cli\u003ePeel and stick adhesive mount (no brackets, clamps, or extra work)\u003c\/li\u003e\n\u003cli\u003eSingle-sided heating element on a 3.0mm foam pad with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eTwo-wire design, no plug, so it hardwires into your existing 12V circuit\u003c\/li\u003e\n\u003cli\u003eQAI Recognized Component, certified to CSA STD C22.2 No.130-03 and UL 499 (file E10681)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003ePad size: 12\" x 18\"\u003c\/li\u003e\n\u003cli\u003ePad thickness: 3.0mm foam with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eFits: non-conductive fresh, grey, or black water holding tanks up to 40 gallons\u003c\/li\u003e\n\u003cli\u003eVoltage: 13.5V DC (12V system)\u003c\/li\u003e\n\u003cli\u003eWattage: 65W\u003c\/li\u003e\n\u003cli\u003eAmperage: 4.8A per pad\u003c\/li\u003e\n\u003cli\u003eLead wire: 36\", two wires, no plug\u003c\/li\u003e\n\u003cli\u003eThermostat: Built in, reads tank temperature. On at 45°F (±5°), off at 68°F (±5°)\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature: 68°F (20°C) ambient\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eMaterials \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eMaterial: Silicone rubber heating element on a 3.0mm foam insulation pad with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eTank material: Designed and tested for holding tanks and drain systems built from electrically non-conductive material. Not for metal tanks\u003c\/li\u003e\n\u003cli\u003eCircuit: Must be fused for the correct amperage and run through an on\/off switch\u003c\/li\u003e\n\u003cli\u003eCertifications: QAI Recognized Component, file E10681, certified to CSA STD C22.2 No.130-03 and UL 499\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eWhat's Included\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e(1) Facon CW-T1218 heater pad with built-in thermostat and 36\" lead wires\u003c\/li\u003e\n\u003cli\u003eNo switch or controller included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eMount the pad at the lowest point on the tank, closest to the drain. The surface needs to be smooth and clean, so wipe that area with isopropyl alcohol and let it dry, peel back the adhesive paper, then press the pad down firmly and smoothly. Do not stretch it. The pad has to sit flat against the tank or wrap around it, and nothing can sit on top of it, batteries especially, because heavy pressure damages the heating element. Facon requires a minimum ambient temperature of 68°F at installation, so install before cold weather hits, not during a freeze.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWire to a 12V circuit fused for the correct amperage and run through an on\/off switch. Observe the polarity marked on the leads. Secure the leads so they do not hang below the bottom of the tank. If your tank takes two pads, wire them in parallel and size the circuit for the combined draw.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMake sure the tank has fluid in it before you power the pad. Running it against an empty tank can overheat and damage the heating element. Switch the circuit on as outside temperatures approach 45°F and the thermostat takes it from there. Switch it off once temperatures stay above freezing or the tank has been drained. Per Facon, the pad should not feel hot to the touch while it is working.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThese GoCode tanks take two CW-T1218 pads each.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eSprinter\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/24-gallon-wheel-well-water-tank-centered\"\u003e24-Gallon Wheel Well Water Tank, Center (SP-C-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/33-gallon-wheel-well-water-tank-left-sp-l-33\"\u003e33-Gallon Wheel Well Water Tank, Left (SP-L-33)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/33-gallon-wheel-well-water-tank-right\"\u003e33-Gallon Wheel Well Water Tank, Right (SP-R-33)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/36-gallon-wheel-well-water-tank-centered\"\u003e36-Gallon Wheel Well Water Tank, Center (SP-C-36)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eTransit\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/24-gallon-ford-transit-wheel-well-water-tank-left\"\u003e24-Gallon Ford Transit Wheel Well Water Tank, Left (TR-L-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/24-gallon-ford-transit-wheel-well-water-tank-center\"\u003e24-Gallon Ford Transit Wheel Well Water Tank, Center (TR-C-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/24-gallon-ford-transit-wheel-well-water-tank-right\"\u003e24-Gallon Ford Transit Wheel Well Water Tank, Right (TR-R-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003ePromaster\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/nw-conversions-28-gallon-promaster-wheel-well-tank-left-pm-l-28\"\u003e28-Gallon Promaster Wheel Well Water Tank, Left (PM-L-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/28-gallon-dodge-promaster-wheel-well-water-tank-center\"\u003e28-Gallon Promaster Wheel Well Water Tank, Center (PM-C-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/nw-conversions-28-gallon-promaster-wheel-well-water-tank-right-pm-r-28\"\u003e28-Gallon Promaster Wheel Well Water Tank, Right (PM-R-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eIf your tank is not on this list, it takes a different pad. Most 16 to 28 gallon Sprinter and Transit tanks use a single 120V CW-T825. The Tacoma and Transit spare tire tanks use the CW-ST725.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePreorder. 3 week lead time. Orders placed now ship as soon as stock arrives.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eResources\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Facon-Heater-Pad-Owners-Manual.pdf?v=1788286728\"\u003eFacon Heater Pad Owner's Manual\u003c\/a\u003e (CW-T1218 specs and wiring on page 4)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457884291236,"sku":"WPU0423","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/CW-T1218.png?v=1788290571"},{"product_id":"facon-cw-t825-tank-heater-pad-8-x-25-120v-ac-automatic-thermostat","title":"Preorder Facon 8\" x 25\" Tank Heater Pad – CW-T825","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe Facon CW-T825 is an 8\" x 25\" self-adhesive silicone heater pad for holding tanks up to 40 gallons. Two things to check before you order: it runs on 120V AC, not 12V DC, and it ships with 36\" bare lead wires instead of a plug, so it gets wired into a shore power or inverter circuit. The built-in thermostat handles the cycling on its own, on at 45°F and off at 68°F, so the only thing you operate is the on\/off switch you wire into the circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**CURRENTLY ON A 3 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e120V AC, wired into a shore power or inverter circuit (not a 12V house battery)\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermostat cycles on at 45°F and off at 68°F, no external controller needed\u003c\/li\u003e\n\u003cli\u003eDirect adhesive mount (no brackets, clamps, or extra work)\u003c\/li\u003e\n\u003cli\u003eSingle-sided heating on a 3.0mm foam pad with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eRequires a ground fault protection device (GFPD\/GFCI) on the circuit\u003c\/li\u003e\n\u003cli\u003eQAI Recognized Component, certified to CSA STD C22.2 No.130-03 and UL 499 (file E10681)\u003c\/li\u003e\n\u003cli\u003eTwo year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePad size: 8\" x 25\"\u003c\/li\u003e\n\u003cli\u003ePad thickness: 3.0mm foam with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eFits: fresh, grey, or black water holding tanks up to 40 gallons\u003c\/li\u003e\n\u003cli\u003eVoltage: 120V AC\u003c\/li\u003e\n\u003cli\u003eWattage: 84W\u003c\/li\u003e\n\u003cli\u003eAmperage: 0.7A\u003c\/li\u003e\n\u003cli\u003eLead wire: 36\", two wires, no plug\u003c\/li\u003e\n\u003cli\u003eThermostat: Built in. On at 45°F (±5°), off at 68°F (±5°)\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature: 68°F (20°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterials \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Silicone rubber heating element on a 3.0mm foam pad with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eSafety requirement: A ground fault protection device (GFPD\/GFCI) must be used with this heater\u003c\/li\u003e\n\u003cli\u003eCertifications: QAI Recognized Component, file E10681, certified to CSA STD C22.2 No.130-03 and UL 499\u003c\/li\u003e\n\u003cli\u003eWarranty: Two year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Facon CW-T825 heater pad with built-in thermostat and 36\" lead wires\u003c\/li\u003e\n\u003cli\u003eNo plug, switch, or controller included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cp\u003eMount the pad at the lowest point on the tank, closest to the drain. Clean that area with isopropyl alcohol and let it dry, peel back the adhesive paper, then press the pad down firmly and smoothly. Do not stretch it. The pad has to sit flat against the tank or wrap around it, and nothing should sit on top of it, because heavy pressure damages the heating element. Ambient temperature needs to be at least 68°F for the adhesive to bond, so install before cold weather hits, not during a freeze.\u003c\/p\u003e\n\u003cp\u003eWire the 36\" leads into a 120V AC circuit fed by shore power or an inverter, fused for the correct amperage, protected by a ground fault protection device, and switched through an on\/off switch. Confirm you have that circuit before ordering, because this model will not run on 12V DC. Secure the leads so they do not hang below the bottom of the tank. If you are running more than one pad, wire them in parallel.\u003c\/p\u003e\n\u003cp\u003eFlip the switch on as outside temperatures approach 45°F and the thermostat takes it from there. Switch it off once temperatures stay above freezing or the tank has been drained. Per Facon, the pad should not feel hot to the touch while it is working.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eOne CW-T825 covers each of these GoCode tanks. Every one of them takes a single pad.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSprinter\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/20-gallon-wheel-well-water-tank-left\"\u003e20-Gallon Wheel Well Water Tank, Left (SP-L-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/20-gallon-wheel-well-water-tank-centered-1\"\u003e20-Gallon Wheel Well Water Tank, Center (SP-C-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/20-gallon-wheel-well-water-tank-right\"\u003e20-Gallon Wheel Well Water Tank, Right (SP-R-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/25-gallon-dually-wheel-well-water-tank-copy\"\u003e22-Gallon Wheel Well Water Tank, Right (SP-R-22)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/19-gallon-slim-dually-wheel-well-water-tank\"\u003e19-Gallon Slim Dually Wheel Well Water Tank (SP-DU-19)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/25-gallon-sprinter-dually-wheel-well-water-tank\"\u003e25-Gallon Dually Wheel Well Water Tank (SP-DU-25)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/28-gallon-sprinter-spare-tire-water-tank\"\u003e28-Gallon Spare Tire Water Tank (SP-ST-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/11-gallon-passenger-side-undercarriage-water-tank\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e11-Gallon Mercedes Sprinter Undercarriage Water Tank (SP-UC-11)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/22-gallon-driver-side-undercarriage-water-tank\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e22-Gallon Mercedes Sprinter Driver Side Undercarriage Water Tank (SP-UC-22)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTransit\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/16-gallon-transit-undercarriage-water-tank\"\u003e16-Gallon Transit Undercarriage Water Tank (TR-UC-16)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/products\/20-gallon-driver-side-transit-undercarriage-water-tank\"\u003e20-Gallon Driver Side Transit Undercarriage Water Tank (TR-UC-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*If your tank is not on this list, it takes a different pad. The larger Sprinter and Transit wheel well tanks and all Promaster tanks use two 13.5V CW-T1218 pads each. The Tacoma and Transit spare tire tanks use the 13.5V CW-ST725. The Grenadier fresh water tank uses two CW-P618 pipe pads.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003ePreorder. 3 week lead time. Orders placed now ship as soon as stock arrives.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Facon-Heater-Pad-Owners-Manual.pdf?v=1788286728\"\u003eFacon Heater Pad Owner's Manual\u003c\/a\u003e (CW-T825 specs and wiring on page 3)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457884586148,"sku":"WPU0424","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/CW-T825.png?v=1788288736"},{"product_id":"facon-cw-p618-pipe-heater-pad-6-x-18-for-1-1-2-pipe-12v-dc","title":"Preorder Facon 6\" x 18\" Tank Heater Pad – CW-P618","description":"\u003ch2 dir=\"ltr\"\u003e\u003cstrong\u003eAbout the Product\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe Facon CW-P618 is a 6\" x 18\" self-adhesive silicone heater pad. It is the narrow one in the Facon lineup, so it goes where the larger tank pads will not fit: tight bays, curved surfaces, and short runs you need to keep above freezing. It bonds directly to the surface with full-surface adhesive backing and runs off a 12V circuit. It will also wrap a 1-1\/2\" pipe if that is the spot you are protecting.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eUnlike the tank pads, this one has no thermostat. It stays off until you flip the switch, which means you control when it runs. Pair it with a manual switch, a timer, or an external thermostat depending on how you want to manage it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e**CURRENTLY ON A 3 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e12V DC, wired to the house battery circuit\u003c\/li\u003e\n\u003cli\u003eNo thermostat, so you choose the control (switch, timer, or external thermostat)\u003c\/li\u003e\n\u003cli\u003eDirect adhesive mount (no brackets, clamps, or extra work)\u003c\/li\u003e\n\u003cli\u003e6\" x 18\" strip on a 3.0mm foam pad, flexible enough to follow a curve\u003c\/li\u003e\n\u003cli\u003eNarrow profile fits where a full-size tank pad will not, and wraps a 1-1\/2\" pipe\u003c\/li\u003e\n\u003cli\u003eInsulation can be run over the pad\u003c\/li\u003e\n\u003cli\u003eQAI Recognized Component, certified to CSA STD C22.2 No.130-03 and UL 499 (file E10681)\u003c\/li\u003e\n\u003cli\u003eTwo year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003ePad size: 6\" x 18\"\u003c\/li\u003e\n\u003cli\u003ePad thickness: 3.0mm foam with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eVoltage: 13.5V DC (12V system)\u003c\/li\u003e\n\u003cli\u003eWattage: 24W\u003c\/li\u003e\n\u003cli\u003eAmperage: 1.8A\u003c\/li\u003e\n\u003cli\u003eLead wire: 18\"\u003c\/li\u003e\n\u003cli\u003eThermostat: None. You supply the control\u003c\/li\u003e\n\u003cli\u003eMinimum installation temperature: 68°F (20°C)\u003c\/li\u003e\n\u003cli\u003eAlso wraps: 1-1\/2\" pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eMaterials \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eMaterial: Silicone rubber heating element on a 3.0mm foam pad with full-surface adhesive backing\u003c\/li\u003e\n\u003cli\u003eCircuit: Must be fused for the correct amperage and run through an on\/off switch\u003c\/li\u003e\n\u003cli\u003eCertifications: QAI Recognized Component, file E10681, certified to CSA STD C22.2 No.130-03 and UL 499\u003c\/li\u003e\n\u003cli\u003eWarranty: Two year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e(1) Facon CW-P618 heater pad with 18\" lead wire\u003c\/li\u003e\n\u003cli\u003eController or switch not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cstrong\u003eInstallation \u0026amp; Wiring\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eClean the surface with isopropyl alcohol and let it dry, peel back the adhesive paper, then press the pad on firmly and smoothly. Do not stretch it. Ambient temperature needs to be at least 68°F for the adhesive to bond, so install before cold weather hits, not during a freeze. Insulation can go over the pad once it is bonded.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWire to a 12V circuit fused for the correct amperage. Facon calls for this pad to be wired directly to an on\/off switch, since there is no thermostat in it to cycle it. Observe the polarity marked on the leads. Secure the leads once the pad is in place. If you are running more than one pad, wire them in parallel and size the circuit for the combined draw.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBecause nothing cycles this pad automatically, switch it on when temperatures approach freezing and off when they do not. A timer or an external thermostat handles that for you if you would rather not think about it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor larger flat surfaces, look at the CW-ST725 (7-1\/4\" x 25\") and CW-T1218 (12\" x 18\") 12V pads instead.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Time\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePreorder. 3 week lead time. Orders placed now ship as soon as stock arrives.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Facon-Heater-Pad-Owners-Manual.pdf?v=1788286728\"\u003eFacon Heater Pad Owner's Manual\u003c\/a\u003e (CW-P618 specs and wiring on page 7)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":51457884913828,"sku":"WPU0425","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/CW-P618.png?v=1788281194"},{"product_id":"venturhaus-in-floor-shower-pan-1","title":"Deep In-Floor Shower Pan","description":"\u003ch2 class=\"font-claude-response-body break-words whitespace-normal\"\u003eAbout the Product\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eThe GoCode Deep In-Floor Shower Pan is a van shower pan that is designed to recesses into your floor, and provides a vertical perimeter surface to receive waterproof wall panels or GoCode's \u003ca href=\"https:\/\/gocodeoverland.com\/products\/tetravan-universal-shower-curtain\"\u003emagnetic shower curtain\u003c\/a\u003e. A cross break in the bottom directs water to the drain. Made from brushed 2205 stainless steel and measuring 30\" x 21.5\", it fits any van, trailer, or RV build. Made in partnership with \u003ca href=\"https:\/\/venturhaus.com\/\"\u003eVenturhaus\u003c\/a\u003e, it’s a straightforward alternative to the \u003ca href=\"https:\/\/gocodeoverland.com\/products\/fold-shower\"\u003eFOLD Shower\u003c\/a\u003e for builders who want a permanent, low-profile shower footprint.\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eRecesses into your floor surface\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCross break bottom directs water to drain\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBrushed magnetic 2205 stainless steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDrain with included 1-1\/2\" threaded straight drain fitting \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eOverall: 30\" x 21.5\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDepth (at the deepest point): 2.375\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCenter Drain Diameter: 2.01\"\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMaterial: 2205 Stainless Steel (Magnetic), Brushed Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDeep In-Floor Shower Pan\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e1-1\/2\" threaded straight drain fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCompatible with any van, trailer, or RV build with adequate subfloor depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Times\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eShips in 1-2 business days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eInstall Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eNeed Help?\u003c\/strong\u003e Not sure about your van's configuration?\u003ca href=\"mailto:sales@gocodeoverland.com\"\u003e Contact us\u003c\/a\u003e, we're happy to help.\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":54297085051044,"sku":"TVU0187-6","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/1_3ddeb50f-63ba-408c-9d4b-37e77caed008.png?v=1792512853"},{"product_id":"wideout-trim-ring-pair","title":"Wideout Trim Ring Pair","description":"\u003ch2 dir=\"ltr\"\u003eAbout the Product\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe GoCode Wideout Trim Rings are an interior trim ring pair (driver and passenger) for \u003ca href=\"https:\/\/sbfilters.com\/products\/sb-wideouts-for-mercedes-sprinter-vans\"\u003eS\u0026amp;B Wideouts\u003c\/a\u003e on Mercedes Sprinter 144\" vans. They finish the opening where your wideout flare, pod, or capsule meets the interior wall. Machine-formed from ABS plastic. No fiberglass, no hand-cutting, no uneven edges.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe photos show S\u0026amp;B Wideouts on a Sprinter from the outside, plus an interior view with a CRL window installed that shows where the trim ring goes.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eFeatures\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eMachine-formed ABS plastic for a clean, consistent fit every time\u003c\/li\u003e\n\u003cli\u003eMade to pair with S\u0026amp;B Wideouts for Sprinter\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eWideout Trim Ring Driver\u003c\/li\u003e\n\u003cli\u003eWideout Trim Ring Passenger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*S\u0026amp;B Wideouts and windows are not included \u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003eMade for \u003ca href=\"https:\/\/sbfilters.com\/products\/sb-wideouts-for-mercedes-sprinter-vans\"\u003eS\u0026amp;B Wideouts for Mercedes Sprinter\u003c\/a\u003e, which fit 2007-2026 Sprinter 144\" vans.\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003eInstall before wall and ceiling paneling for best results. Post-panel installs are possible but may require trimming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eShips in 1-2 business days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eResources\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eNeed Help?\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e Questions about fitment or your build? \u003c\/span\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/pages\/get-in-touch\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eContact us\u003c\/a\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e, we’re happy to help.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePhoto Credits to \u003ca href=\"https:\/\/sbfilters.com\/\"\u003eS\u0026amp;B\u003c\/a\u003e.\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":57589005090980,"sku":"GCS0436","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/1_75ae434f-7e29-45d2-937d-4c69abe8476b.png?v=1792531062"}],"url":"https:\/\/gocodeoverland.com\/collections\/spooky-email-7-new-things.oembed","provider":"GoCode","version":"1.0","type":"link"}